Product Description

 

 

All round view car camera control box(XY-3028)

 

 

1.Left/Right view controled by turning switch

When you don’t pull the reverse gear, only turn the steering lamps, this system will activate Monitor and Side view camera (Left/Right side view camera is controlled by Left/Right steering lamp). When steer turning is finished, after 5 seconds, will switch to front view camera, if no signal input, will shut off front view camera automatically after 15 seconds.  

2.Automatical rear and front view

When you pull the reverse gear, the system will activate the monitor and rear view camera till the reverse gear switch back, then switches to front view camera, if no any trigger activation, front view camera will shut off after 15 seconds.

4. Manual Front/Back/Left/Right view controled by switch(included)

After press  Front/Back/Left/RightView key, if no other signals input, car monitor and car Front/Back/Left/Rightview camera will be working all the time, until you shut off the Front/Back/Left/Right view video by press the power switch.


Parameters:
 

The system working current: Max: 50MA. (Excludes working current of cameras)
 

The system working power: 9-30V. (Power supply to cameras is the same as the system input voltage, in 24V vehicle, please use 24V cameras)
 

System signal: PAL/NTSC/SECAM
 

Video output: 1.0VPP/75Ω
 

Working temperature: -20℃-80℃
 

Operation Temperature: -40℃-85℃
 

Product Image